Hyper eutectic composite carbides metallurgically bonded to a mild steel backing plate. This combination of carbides    with minimum hardness of 770 Hv, and carbides up to 1500 Hv gives you a very high abrasion & impact resistant properties.

Zuper Chocos are mainly used on the bottom of the excavator bucket to withstand heavy impact & sliding abrasion.     The backing plate gives you the ability to form and weld the block onto curved or flat surfaces.

All Dimensions in mm

Through extreme research it has been observed that direct inserts are much better wear protection patterns than hardfacing welding.

• As compared to welding this is very cost effective.
• No high stresses developed on the base metal.
• Huge savings in labour cost.

IMCO is committed to provide the highest quality products and services, conduct supervision, guiding upon the exact configuration procedures to reconditioning bucket in right and cheapest methods will save a lot of your down time, labour, money and top it with highest working life compared to any other conventional costly hardfacing welding.

A modified abrasion resistant composite consisting of carbides in a metallic matrix, metallurgically bonded to a mild steel disc. The carbides have a minimum hardness of 770 Hv and contain carbides upto 1500 Hv.

Zuper Buttons are designed circular and dome shaped to minimize the effects of heavy impact and resist high stress abrasion & erosion.

These are mainly used to protect the bucket from all the sides, adaptor area are easy to weld as these are also available in sheets in which the buttons are fitte as per your contour.